Projects 7, 8, 9, and 10: Jewelry Diversity

Poor, neglected blog! 3 months of no posts is a bit long. Here's what I've been up to-

I found a good way to seal rings - 4 coats of varnish followed by 3 coats of clear nail polish. This combination works surprisingly well; it can stand up to water, medium scratching and jostling, and doesn't aggravate the skin. I've made a few rings but have given some away. I still have two.

This ring is made out of bocote (ba-cote-ay) - a lovely, ringed hardwood from India. The rings are starting to take less time - about 3 hours now.

This ring is made of paduak (pah-duke), which comes from Africa and Asia. Unfortunately, paduke is a softer wood, which I have learned is not good for rings. I was refreshing my bad habit of popping my knuckles and in the process heard this ring crack. It's fractured in 3 places and I'm hoping that a bunch of nail polish coats can stiffen it up. I also carved this ring so that the grain of the wood is parallel with the width of the ring. The grain of the ring runs up and down in this photo. This is also a bad idea because it weakens the compression strength of the wood. A pretty brittle ring. I suppose I'll enjoy it while I can.

These earrings are made out of ebony from Africa. Superglue (what else?!) was used to affix the metal backs. They turned out a little more Gothic than I intended. I was shooting for more of a shooting star/comet design but they came out looking like menacing teeth. These took about 6 hours.

Making a bracelet was totally new to me. After many mess-ups, I was able to make beads by drilling into a block of wood and then cutting the holes and surrounding wood into bite-sized pieces. These pieces were carved into beads. The woods are, from left to right: maple, bocote, ebony, paduak, bocote, and then the same list mirrored down the right side. The cord is black leather. This bracelet took about 10 hours. Now that the design and methods are figured out, I could probably do another in half the time.

After finishing these projects, I now have a good handsaw and push drill, so I probably won't use any more power tools for cutting and drilling.

Project 6: Rings

For many years, one of the things I have envied about women is that they can wear jewelry.  While women can use jewelry to accentuate their style, outfit, hair, what have you, men's jewelry frequently seems to be some sort of boast or status symbol instead of an accessory for the sake of style.  I have been thinking a lot about potential designs that might look good on men, and rings are the frontrunners of my thoughts.  In the meantime, though, I have been making rings for close female friends.

With these projects, I started doing a lot of new things.  They mark my first forays into the world of hardwood, the first times that I have custom-made an item for someone, and also the first time that I have tried varnishing.

The first ring was to be made out of ebony - a very expensive (more than $1 per cubic inch) and strange wood.  As I carved it, the wood behaved more like charcoal or a soft stone than wood.  It flaked, crumbled, and dusted away, rather than the usual peeling tendency along the grain.  It dulled my knives frequently; I found that I had to resharpen after about 15 minutes of steady carving.  I was worried that I would break off too much in a stroke, leaving a gap in the band or fracturing the ring altogether.

Shortly after starting out.

But the wood behaved well enough, and I made steady progress.  I thought that carving out the hole of the ring would be the most difficult.  I instead found that this was the easiest part - all I had to do was poke a small hole in the middle of the ring-block and start twisting the knife.  The hole got larger and larger as I held the knife still and made the ring rotate around its sharp, grinding edge.  Carving out the entire finger hole only took me about 30 minutes.  

Beginning to carve out the finger hole.

Finger hole complete, the ring only needs to be thinned and sanded.

I made the second ring out of canary wood.  This wood was easier than the ebony.  It is a nice goldenrod color, a pigment not quite captured correctly by the photo below.  For the canary wood ring, I decided to try varnishing for the first time.  I put 4 coats on it.  It ended up with a nice shine that brought out the color of the wood, deepening it and adding some iridescence.  I later found out that varnish is probably not good for rings as it wears off quickly when exposed to the normal wear-and-tear of daily hand activity.  So it looks like my jewelry, or my rings at least, will remain unvarnished.  

Completed canary wood ring.

The ebony ring took me about 5 hours, the canary wood ring about the same amount of time including varnishing.

Project 5: Asymptote of Affection

For this carving, I wanted to do something specifically for a friend.  I have a friend who is quite the mathematician and who would appreciate something to do with numbers, symbols, and theories moreso than an animal.

Gift-giving is perhaps more revealing than we think it might be.  There are always the comical yet slightly indicative gift-giving habits: those who give gifts to you as if you were them, the acquaintance-becoming-friend who doesn't quite know you well enough to give something appropriate and so buys something expensive, the relative who perhaps wishes you were more of this or more of that and so buys you something to facilitate your miraculous pending personality change, those who used to give you gifts but, due to separation or falling-away, do not any longer (for which they should not be blamed), those sweethearts who, piece by delicate piece, build castles and ramparts as gifts out of toothpicks and popsicle sticks; a castle in the sky.

I hope to have enough time to carve many or most of my gifts.  I wanted to carve a meaningful math symbol.  The infinity symbol came to mind quickly.  For some reason, it seems like infinity symbols would naturally be made of some metal: aluminum, steel, copper.  I really like the softness that the wood lends to the symbol and metaphorical implications that go along with it.  The hard, cold, math symbol of infinity mixed with the materials from a tree - a plant that often takes the role of an adored or longed-for permanence.

Carved, ready to be sanded.

After sanding.

This project was quite a bit of fun.  Carving the holes was particularly stimulating.  I used my curved detail knife - it worked very well.  I started with an appropriately small block of wood and so didn't have to shave off piece after piece to get down to the detailing.  Perhaps the most difficult part was getting the intersection of the curves to look natural.  I discovered a few things about how the eye works to put images together.  The curved bands look like they meet their partners on the other side of the intersection, but if one were to draw a line, I am confident that they would be fairly off.  I think that I perhaps also discovered this 15 years ago while reading the back of a box of Lucky Charms.

The carving took 5-6 hours.  It is about 2 3/4 inches long and is made out of Butternut, a cranky but multi-toned wood.

Basswood

New shipment of basswood in today.  Such large blocks!  I am a bit intimidated by them...

Any suggestions for what I could make from these?  They're 3x3x6.

Project 4: Squid

During the revealing of my fourth carving, a good deal of the work was done at the lake.  What an appropriate place for carving!  The place demands that one is comfortable with his mind - there is simply nowhere to hide.

Typical lake sunset.

And so trips to the lake invariably focus on activity, games, and good conversation, which are all somehow hard to come by when not there.  The world is stripped of its extraneous parts, just as my carving is whittled down while sitting at the gazebo, near the waves.

Each visit, one is reminded (or informed for the first time) of what actually makes him happy; which activity or game he prefers and how he can fill his social interactions with vigor and magnanimity, as he must spend many, many more hours with those present.

Also, the lake is a place where woodchip cleanup is never necessary.

During the 4 hour car trip, I was frequently tempted to carve.  Though it took some cleanup, I'm glad that I did it, as it was great for passing the time.

Here is a photo of the preliminary shaping stages with prop assistance from the dashboard.

For this carving, I decided to make a squid.  I wanted to make another aquatic critter that was smooth - the sanded basswood is just too attractive for me to get away from.

The hardest part of the squid might appear to be his thin and delicate tentacle bundle, (which I anticipated being the hardest) but in fact it was getting his proportions right.  As one of my friends and I discussed, squid are "formless, shapeless blobs."  This lack of features made it difficult to navigate his revealing, just as it would be to make one's way using a map with few details, street names, etc.

After carving him and recarving him, he started to become quite miniscule, so much so that I decided to simply stop making him smaller, proportions be damned.  I ended up with a slightly chunky squid with a runty tail, but something that looked like a squid nonetheless.  

It was fun carving the details on his tentacle bundle.  It was a moment when I felt creative in his design.

Overall, I am happy with him.  He is made of basswood, is about 3 inches long, and took about 8 hours.  He is sanded - first with course sandpaper and then superfine paper.  He is about a 1:1.5 scale.

Project 3: Snakebit

For this project, I wanted to really challenge myself.  A snake seemed appropriate, being so small and breakable.  It started off a little rough.  I got quite frustrated while trying to get the shape right.  In my consternation, I cut myself big-time.  Don't worry - I'm fine, still carving, etc., though may have a little scar.  

I know it's pretty gory, and I debated putting this photo up, but decided that I must.  As I carve, I become more and more convinced of the importance of process - its intrinsic value and also its relationship to the grand scheme.  I'm not about to leave out the painful or sad part of the story.  It's important - Brave New World's "a gramme is better than a damn!" seems to me an apt criticism of the sterilization and sequestration of pain.  

And how interesting it is that the snake (that poor, accused creature) has so far caused my largest wound!  I love him anyway.

The knife that was involved with this scandal was my large, curve-edged knife: good for long, rounding cuts.  I found the knife invaluable for this project - cutting against the grain for the snake's twists, the curved blade made the strokes easier, allowing me to proceed faster and with more detail.  I think that it is also quite pretty.  It has a certain draw or elegance.  At the start of a project, it is always the knife that I want to reach for first, despite it not being the knife for preliminary cutting.  It is the only blade that I have to sharpen in portions (the curvature is enough so that one type of sharpening stroke will not cover it.)  

The beautiful culprit

After cleaning myself up, I decided to draw an outline for the general shape of the snake.  In this photo, you can see half of the drawn portion; the other half I have started to carve off.  It served as a nice guide, but I eventually found it to be a nuisance and wanted to follow my own model.  The progression follows in the next 3 photos:

Starting to remove the outline.

Pre-curvature snake (blocky.)

Post-curvature snake (rounded,) almost ready to be sanded.

By far the most difficult aspect of the snake turned out to be capturing his posture.  I kept finding myself thinking that he looked posed, rigid, or blocky.  He always needed more of this, more of that.  After quite a bit of thinking, attempting, and bungling, I think I finally achieved something that doesn't look too forced.  I was perhaps hoping for something with larger curves, but am mainly happy that I didn't break his tail, etc.  Here is the finished product:

It was also a challenge deciding exactly what texture I wanted on him.  I was used to a smooth surface, but decided that I wanted scales.  Here is a detail of what I came up with:

The snake is made of butternut - a darker, more splinter-y wood.  It is generally more fitful than basswood or tupelo, but has a lively color spectrum.  All together, he took me 7-8 hours.  His underside is sanded smooth and I modeled his head after a copperhead snake.

Project 2: Whale

For this carving, I wanted a smooth subject.  I recently added sandpaper to my arsenal ($8 total) and wanted to try it out.  

The sperm whale was intended to be my first project.  Elegant, simple, and smooth, he is prime for my sandy mood.  I'm also attached to whales in general - their great size, their woodwind mood, their alien calls.  They make us proud to call ourselves mammals.

He is about 5 inches long; 1:160 scale.  Real sperm whales can reach 67 feet.

He is made of basswood, coincidentally a white wood, he is not intended to be Moby Dick.  He seems a bit too calm for that unfortunate whale... maybe it's Moby before he met Ahab.  It was a fun challenge getting all of his proportions right - I'm still not sure everything is where it should be.  But oh well, you get the sense... I think.

Pre-Ahab Moby took about 7 hours.  Especially time-consuming was his tail.  The underside arc must be carved against the grain of the wood and therefore requires more force and awkward knife strokes.  I must say that I did not avoid cutting myself during this project, though it was minor.  Sanding took about an hour total: medium-grain and then superfine-grain.  

I am pleased with him.  The sanding made him extremely smooth.  Though the robed figure had a stimulating, jarring look, the whale perhaps looks like a more finished work because of his smoothness.  What do you think?